waterproof intelligent electric heated gloves

Usage method:

1. Please check whether the gloves are in good condition and charge the batteries before using them.
2. After the detection is correct, the charged battery is connected with the DC wire in the glove, and the battery is placed in the zipper pocket.
3. Press the glove switch lightly, all three red lights above the switch are on, this is the high temperature gear; press again to show two red lights, this is the moderate temperature gear; press again to show a red light, this is the low temperature gear; press again to turn off the light, the glove do not work.
4. When heating is not required, turn off the power supply first and then unplug the battery.

Special battery charging method:

1. Remove the battery from the glove.
2. When not charged, the charger indicator is green.
3. After plugging in the batteries that need to be charged, the charger indicator lights turn red.
4. When the battery is full, the charger indicator lights turn green.

Matters needing attention:

1. It is strictly forbidden to disassemble or bend the product on its own to avoid damaging the electric heating chips.
2. It is strictly forbidden to use this product in an environment above 30℃ or in a sealed heat preservation environment in order to avoid high temperature scald or fire.
3. It is strictly forbidden to modify this product or use it in conjunction with other voltage-inconsistent devices to avoid potential safety hazards.
4. If the local temperature of the product is too high or too hot or the battery is bulging, please stop using immediately, turn off the power supply and contact the manufacturer.
5. When plugging and unplugging batteries, please grasp the plugs at both ends separately. Violent pulling of wires is prohibited in order to avoid breaking the internal lines.

Clean maintenance:
1. If gloves need to be cleaned, please gently brush them with a brush or wet cloth. They can be washed by hand, not by machine.
2. Without using this product for a long time, batteries should be stored in room temperature and dry environment to avoid overheating or damp corrosion environment.
3. Batteries should be charged and maintained every three months when they are not used for a long time.